How to Reset Maintenance Light on Toyota Camry: Easy Steps for All Years

Tired of seeing the maintenance required light pop up on your Toyota Camry’s dashboard? You’re not alone. Many drivers get confused when this light stays on, even after an oil change. Don’t worry, resetting it is simple.

This guide shows how to reset maintenance light on Toyota Camry models. Whether you drive an older Camry or a brand-new one, these steps will help you clear that dashboard warning in just minutes.

Why the Maintenance Light Turns On

The maintenance required light on your Toyota Camry is a helpful reminder, not a warning of serious problems.

Common Reasons the Light Comes On:

• Time for an oil change
• Routine mileage-based service
• Factory-set maintenance intervals
• Missed service schedule reset after a previous oil change

It doesn’t mean your car is broken, but it’s asking you to pay attention.

Step-by-Step Instructions to Reset the Light

Let’s get into the exact steps based on your Camry’s model year. Resetting the light usually takes less than 2 minutes.

For 2007–2011 Toyota Camry

1. Turn your key to the “ON” position (do not start the engine).
2. Make sure the odometer is showing (not trip A or B).
3. Turn the key off.
4. Press and hold the trip reset button.
5. While holding the button, turn the key back to the “ON” position.
6. Wait for the dashes (—) to appear and then disappear.
7. The light is now reset.

For 2012–2017 Toyota Camry

1. Turn the ignition to “ON” (engine off).
2. Press the “Trip” button until you see Trip A on the screen.
3. Turn the ignition off.
4. Hold down the Trip button.
5. While holding, turn the ignition back to “ON”.
6. Wait until the “resetting maintenance data” message shows and disappears.
7. Release the button.

For 2018–2024 Toyota Camry (Push-Button Start)

1. Press the START button twice without pressing the brake pedal (ignition ON, engine off).
2. Use the arrow buttons on the steering wheel to navigate to the gear icon (Settings).
3. Scroll to “Vehicle Settings” and press OK.
4. Select “Scheduled Maintenance” or “Maintenance Reset”.
5. Choose Yes to confirm.
6. The light will turn off.

What to Do if the Light Doesn’t Turn Off

If the maintenance required light on your Toyota Camry doesn’t reset, try these tips:

• Repeat the steps slowly. Timing matters.
• Make sure the car is in the right ignition mode.
• Check if you were in Trip A or odometer mode, depending on the year.
• Disconnect the battery for 10 minutes (only if you’re comfortable doing so).
• Refer to the [Toyota Camry Owner’s Manual PDF] for detailed instructions.
• Visit a Toyota-certified mechanic for help.

FAQs

How often should I reset the maintenance light?

Only reset it after completing maintenance, like an oil change or filter replacement.

Is it safe to ignore the maintenance light?

No. While it’s not urgent like a check engine light, it’s still important. It reminds you to care for your car. Ignoring it could lead to bigger problems.

Final Tips and Warnings

• Always do the maintenance first, then reset the light.
• Do not use this method to hide issues or skip service.
• Resetting without maintenance can shorten your engine’s life.
• Keep a maintenance log to track your service history.

Conclusion

Now that you know how to reset the maintenance light on Toyota Camry, you can drive with peace of mind. It’s a quick fix, but it keeps your car running smoothly. Don’t forget, regular maintenance is the key to long-lasting performance. Now that your Camry is reset, keep up with your mainure issues.